Ferguson REGENT P1 DAB+, Руководство пользователя

Страница: 34 / 73

Sleep Timer Setup
- During any operating mode, press and hold
MENU/INFO button to enter menu mode, and then enter
the submenu “System >Sleep", “Set sleep time” shown on the display and the sleep icon
flashes on the display.
- Rotary Tune/Navigate knob to adjust the sleep delay time in minutes from: Sleep off
/15/30/45/60/90.
-Press Tune/Navigate knob again to confirm the sleep time setting, the sleep icon “ ”
stops flashing on the display.
- Select “Sleep off” to cancel the sleep mode, the sleep icon “ ” disappears
simultaneously.
SETTING AND USING THE ALARMS
As well as a clock/calendar, there are two versatile wake-up alarms with snooze facility.
Each alarm can use a buzzer or a selection from DAB or FM for the alarm sound, an active
alarm is indicated by a bell icon “ ” in the left of the LCD display.
Note: the alarm parameters can only be set in power on mode after time set.
Set the Alarm 1.
1. During any operating mode, press and hold the MENU/INFO
button to enter menu mode, and then rotary and press the Tune/
Navigate knob to select the submenu Alarm from System,
"Alarm 1 Setup” is shown on the display, press Tune/Navigate
knob again to start setting the Alarm 1.
2. Rotary the Tune/Navigate knob to adjust the hour, then press
it to confirm the hour, the hour digit will stop flashing and the
minute digit will start flashing.
3. The Alarm1 Time Set prompts you for the following parameters. Select a value for each
parameter in turn by using the Tune/Navigate knob to confirm and move on to the next
parameter.