Ferguson REGENT P1 DAB+, Руководство пользователя

Страница: 32 / 73

this, refer to the operation manual of your player.
2. Short press the / MODE button to switch to Bluetooth mode, “Bluetooth” is shown
& "Disconnected" is flashed on the display. It shows that this unit is available to pair
with other devices.
Pair the Speaker
1. If you haven’t paired this unit with a device or the paired devices list is empty, pairing
mode is activated.
2. Activate Bluetooth on the compatible device, and set it to search for compatible
devices.
3. Select the speaker name “REGENT P1DAB+ ” from the list of found devices.
Tips: Only one playback unit can be connected to the speaker. If the speaker is already
connected to another playback unit, the speaker will not appear in the BT selection list.
If your device asks for a passkey (depending on the device manufacturers, model, and
software version), then enter digits “0000 ” (four zeros) and press OK.
If pairing has been carried out successfully, a voice prompt “Connecting” will be heard,
meanwhile, “Connected” will be shown on the display.
4. After connected completely, you can listen to music wirelessly
through Bluetooth and select music in Bluetooth device.
5. Press button to pause or resume playback.
6. Press “ ” button to skip to next track, or press “ ” button to the beginning of
current track or previous track.
7. To stop the unit, press and hold the / MODE button to turn into standby mode or
switch the unit on by setting the Power ON/OFF switch on the back of the unit to OFF
position .
NOTES:
 Depending on the device manufacturer, you need to perform the registration
(PAIRING) again to connect the devices
 The Bluetooth compatibility cannot be ensured for devices (e.g. mobile phones)
getting released in the future.