TS2000 PRINTERS OPERATION MANUAL
Papers II
(NOTES 1-2-3-4)
Jujo Thermal AP50KS-D
AF50KS-E
Mitsubishi Hi-Tech Paper F5041
KSP P300
KANZAN KF50
Nippon Paper TL69KS-LH
*5
NOTES:
1 : Do not use perforated thermal paper.
2 : The amount of paper powder generated by cutting paper depends on the thermal paper used.
Verify the performance with your actual device to select the thermal paper.
3 : Maximum print speed is 170mm/s in the following cases
：
・
When operating temperature range is from -10°C to 0°C.
4 : Paper cutting environment : Room temperature and humidity, the shape of the paper exit described in
this manual. When using the thermal paper specified Papers II, paper cutting resistance is 700,000 cuts or
more.
→ Print quality varies depending on paper types.
→ Use the specified thermal paper, or proper print quality may not be obtained, the life of the
print head and autocutter unit may be shortened, or printer troubles may be caused.
3.4.
COMMUNICATIONS INTERFACE
Serial
Serial interface RS232 (baud options 115200, 38400, 19200, 9600)
USB
USB 2.0 480Mbit/s
3.5.
DIGITAL OUTPUT
Max Drive current
100mA continuous, 200mA peak.
Max supported voltage
45V DC
3.6.
INTERNAL BUFFER
The standard TS2000 printer has a 32 Kbytes internal memory buffer, whose functionality is
dynamically shared by the receiving buffer.
The buffer is being filled at the same time that buffered data is being printed, for that reason high
transmission speed is required in order to ensure that data is available for printing at any time. Data
transfer of at least 115200 baud or USB connection increase the printing performance substantially.
3.7.
ELECTRICAL SPECIFICATIONS
Power supply:
24V DC
±
10%
Consumption:
Printer current consumption
CAPD247
CAPD347
V
P
line Thermal head drive
Motor drive
Logic
5.23 A max. (at 26.4 V)
*3
0.44 A max.
0.30 A max.
5.23 A max. (at 26.4 V)
*3
0.52 A max.
*4
0.30 A max.
Autocutter current consumption
0.64 A max.
0.64 A max.
*5
7/58
