Fenix G56.2, Руководство пользователя

Страница: 3 / 26

Fenix G56.2
3
Rev. 0.2 – G56.2
Carbon Nut assembly
---------
Read me first!!! ---------
G56.2 use this kind of special nut in several places.
Just take your time and the result will be great.
Those comes already pre-assembled, but is always good
to know “how to”, just in case of…
To insert the Nut in the carbon fibre you have to follow
this easy procedure.
Slide the M3 and M4 washer over the M3 x 12 Socket
Head Screw.
Insert the screw in the carbon part and tight by hand the
special nut.
Once the nut hit the carbon fibre it will start to secure
itself into the CF.
Tighten it slowly (very slowly ) until it stops.
Don’t overtight it – is completely unnecessary
Tip 1:
You might want to slightly chamfer the Top face with
your body reamer.
Just enough to remove the sharp edge
Tip 2:
When the nut hit the carbon fibre, before insert it fully,
you can add a tiny drop of thin slow cure CA glue. Very
tiny….
Tip 3:
Don’t use electric tools to drive the screw, most likely
you’ll end damaging the carbon fibre….