Fenix G56.2, Руководство пользователя

Страница: 6 / 26

Fenix G56.2
6
Rev. 0.2 – G56.2
Install the 2 arm holders
using 4 x HW004 M3x10
button screws.
See Note 1
According the numbers of G562-14 Shims you’re using in your setup, the screw
used to assembly the lower arms and the arms holder might have to be replaced
with shorter ones
Note 1
Active caster settings.
5 Degrees are default
setting.
G56-031 arm –
G56-033 eyelet-
G56-032 turnbuckle
G56-037 sphere
Make 2 sets
Slide the G56-013 front
beam into the upper
arm mounts, then insert
the G56-034 hinge pins
and secure them with
the HW031 M2x4 screw