Fenix EPC1200, Руководство по эксплуатации

Страница: 37 / 56

EPC1200 SERIES OPERATION MANUAL
37/56
[Description] Sets the print position to the beginning of print line.
•
n
specifies the data processing in the print buffer.
n
Printing position
0 Sets the print position to the beginning of print line after deleting all data
in the print buffer.
1 Sets the print position to the beginning of print line after printing all data in
the print buffer.
GS f n
[Name] Select font for Human Readable Interpretation (HRI) characters
[Format] ASCII GS f
n
Hex 1D 66
n
Decimal 29 102
n
[Range]
n
= 0, 1
[Description] Selects a font for the HRI characters used when printing a bar code.
n
selects a font from the following table:
n Font
0 Font A (12x24)
1 Font B (8x16)
[Notes]
•
HRI indicates Human Readable Interpretation
•
HRI characters are printed at the position specified by
GS H
.
•
HRI characters are always printed at X-Scale = 1 and Y-Scale = 1
[Default]
n
= 1
[Reference]
GS H, GS k
GS H n
[Name] Select print position for HRI characters.
[Format] ASCII GS H
n
Hex 1D 48
n
Decimal 29 72
n
[Range]
n
= 0, 3
[Description] Selects the print position of HRI characters when printing a bar code.
n
selects the print position as follows:
n Printing position
0 Not printed
1 Above the bar code
2 Below the bar code
3 Both above and below the code bar
[Notes]
•
HRI indicates Human Readable Interpretation.
•
HRI characters are printed using X-scale=1, Y-scale=1 and the font specified by
GS
f
[Default]
n
= <02>H
[Reference]
GS f, GS k
GS h n
[Name] Select bar code height
[Format] ASCII GS h
n
Hex 1D 68
n
Decimal 29 104
n
[Range] 0
≤
n
≤
255
[Description] Selects the height of the bar code.
n
specifies the bar code height in the vertical direction [
n
x 0.0625 mm (0.0049”)].
[Default]
n
= 160 (10mm)
[Reference]
GS k