Fenix EPC1200, Руководство по эксплуатации

Страница: 33 / 56

EPC1200 SERIES OPERATION MANUAL
33/56
[Name] Print and feed paper
[Format] ASCII ESC J
n
Hex 1B 4A
n
Decimal 27 74
n
[Range] 0
≤
n
≤
255
[Description] Prints the data in the print buffer and feeds the paper [
n
x 0.125 mm (0.0049”)].
[Notes]
•
After printing is completed, this command sets the print starting position to the
beginning of the line.
•
The paper feed amount set by this command does not affect the values set by
ESC
2
or
ESC 3
.
•
The printer uses the vertical motion unit
(
y).
ESC M n
[Name] Select character font
[Format] ASCII ESC M
n
Hex 1B 4D
n
Decimal 27 77
n
[Range]
n
= 0, 1
[Description] Selects the character font.
n Function
0 Character Font A (12 x 24) selected
1 Character Font B (8 x 16) selected
[Notes]
•
ESC !
can also select character font types. However the setting of the last received
command is effective.
•
This command must be sent at the beginning of a line. If it is sent in the middle of a
line, all previous data in the print buffer is printed and the ticket is placed at the
beginning of the next line.
[Reference]
ESC !, APPENDIX A
ESC a n
[Name] Select justification
[Format] ASCII ESC a
n
Hex 1B 61
n
Decimal 27 97
n
[Range] 0
≤
n
≤
2
, 48
≤
n
≤
50
[Description] Aligns all the data in one line to the specified position
n
selects the justification as follows:
n(Hex) n (Dec)
Justification
0, 30 0, 48 Left justification
0, 31 0, 49 Centering
0, 32 0, 50 Right justification
[Notes]
•
The command is enabled only when processed at the beginning of the line.
•
This command executes justification in the printing area.
[Reference]
ESC !
[Example]
Left justification Centering Right justification
ESC c 3 n
ABC
ABCD
ABCDE
ABC
ABCD
ABCDE
ABC
ABCD
ABCDE