Intelligent Overheat Protection
The light will accumulate a lot of heat when used on High or Turbo modes for extended periods.
When the light reaches a temperature of
50°C
or above, the light will automatically step down a
few lumens to reduce the temperature. When the temperature drops below
50°C
, it will then
allow the user for the reselection of High or Turbo modes.
Low‐voltage Warning
When the voltage level drops below the preset level, the flashlight is programmed to downshift
to a lower brightness level until Eco output is reached. When this happens in Eco output mode,
the light blinks 3 times every 5 minutes to remind you to timely recharge the battery.
Usage and Maintenance
Disassembling the sealed head can cause damage to the light and will void the warranty.
Lock the light to prevent accidental activation during storage or transportation.
The light may flicker, shine intermittently or even fail to illuminate for the following reasons:
A: Poor battery level.
Solution: Recharge the light.
B: The light has been locked.
Solution: Double click the switch to unlock the light.
If the above methods don't work, please contact your authorized distributor.
