11
10
Ф
500mm
230mm
230mm
200mm
296mm
566mm
164mm
Power cord
Names of components and dimensions
Accessories
Installation Panel fixed screw
(4x25 tapping screw)
Installation panel
Power cord
Manual
6
1
1
1
※
Unit dimensions: 566x296x164mm
weight:7. 0kg
※
Package dimensions: 605x350x240mm weight:8. 5kg
Precautions before installing
Do not install in the following types of location (otherwise this may
cause malfunction):
Locations where the unit may come into direct contact with water.
Locations where the unit is under direct or
strong sunlight
Locations where there is a lot of
condensation.
Locations where corrosive, neutral,
or reductive gases are present
Installation position guide
Leave at least 400mm clearance at
both sides to make it easier to use.
Install the unit on the flat wall without
unevenness and which can support
the weight of the unit.
There are two methods to connect the power supply.
(1) Power cord with plug
(2) Power cord with no plug (cut-off plug)
Directly connected to the socket :
Pluggable
mode:
The wall socket
is placed next
to the unit
(right or left is
suitable)
Bottom connecting
position
Socket placed on the
wall (below the unit)
Power cord
(with ground
wire)
※
Note:
The 2 fixed screws should be
removed before installation,
otherwise, you cannot change
the filter, see the right figure.
165mm
58mm
Installation panel
