Fenix Imvico TK14, Руководство по эксплуатации

Страница: 37 / 59

FENIX IMVICO TK14 OPERATION MANUAL
37/65
ESC c 5 n
[Name] Enable/disable panel buttons
[Format] ASCII ESC c 5 n
Hex 1B 63 35 n
Decimal 27 99 53
n
[Range] 0
≤
n
≤
255
[Description] Enables or disables the panel buttons.
•
When the LSB of n is 0, the panel buttons are enabled.
•
When the LSB of n is 1, the panel buttons are disabled.
[Notes] Only the lowest bit of n is valid.
•
In this printer, only the FEED button can be disable.
[Default] n = 0
ESC d n
[Name] Print and feed n lines
[Format] ASCII ESC d n
Hex 1B 64 n
Decimal 27 100 n
[Range] <00>H
≤
n
≤
<FF>H
[Description] Prints the data in the print buffer and feeds n character lines.
[Notes] This command sets the print starting position to the beginning of the line.
•
This command does not affect the line spacing set by ESC 2 or ESC 3 .
•
The maximum paper feed amount is 1016 mm {40”}. If the paper feed amount (n x line
spacing) of more than 1016 mm {40”} is specified, the printer feeds the paper only
1016 mm {40”}.
•
Every line feed corresponds to the current selected font height (24 dots for Font A and
16 dots for Font B).
[Reference] ESC 2, ESC 3.
GS ! n
[Name] Select character size
[Format] ASCII GS ! n
Hex 1D 21 n
Decimal 29 33
n
[Range] <00>
≤
n
≤
<FF>H (1
≤
vertical number of times
≤
8, 1
≤
horizontal number of times
≤
8)
[Description] Selects the character height using bits 0 to 3 and selects the character width using bits 4
to 7, as follows:
Bit OFF / ON Hex Function
0
1
2
3 Character height selection. See Table 2.
4
5
6
7 Character width selection. See Table 1.
Table 1 Table 2
Character Width Selection Character Height Selection
Hex Width Hex Height
00 1 (normal) 00 1 (normal)
10 2 (double-width) 01 2 (double-height)
20 3 02 3
30 4 03 4
40 5 04 5
50 6 05 6
60 7 06 7
70 8 07 8