Fenix Imvico TK14, Руководство по эксплуатации

Страница: 33 / 59

FENIX IMVICO TK14 OPERATION MANUAL
33/65
ESC t n
[Name] Select character code table
[Formato] ASCII ESC t n
Hex 1B 74 n
Decimal 27 116 n
[Range] n =<00>H , n = <11>H
[Description] Selects page n from the character code table.
n Page
0 PC437 (U.S.A., standard Europe)
17 PC866 (Cyrillic)
[Default] n = 0
[Reference] APPENDIX F
ESC SP n
[Name] Set right-side character spacing
[Format]
ASCII ESC SP n
Hex 1B 20 n
Decimal 27 32 n
[Range] <00>H
≤
n
≤
<FF>H
[Description] Sets the character spacing for the right side of the character to [ n x 0.125 mm
( n x 0.0049”)].
[Notes]
•
The right side character spacing for double-width mode is twice the normal
value. When characters are enlarged, the right-side character spacing is n times
normal value.
•
This command is effective only when sent at the beginning of a line.
[Default] n = <04>H
[Reference] APPENDIX A
ESC ! n
[Name] Select print mode(s)
[Format] ASCII ESC ! n
Hex 1B 21
n
Decimal 27 33 n
[Range] <00>H
≤
n
≤
<FF>H
[Description] Selects print mode(s) using n as follows:
Bit OFF/ON Hex Function
OFF 00
Character font A (12 x 24).
0
ON 01 Character font B (8 x 16).
1 -- -- Undefined.
2 -- -- Undefined.
OFF 00 Emphasized mode not selected. 3
ON 08 Emphasized mode selected.
OFF 00 Double-height mode not selected. 4
ON 10 Double-height mode selected.
OFF 00 Double-width mode not selected. 5
ON 20 Double-width mode selected.
6 -- -- Undefined.
7 -- -- Undefined.
[Notes]
•
When both double-height and double-width modes are selected, quadruple-size characters
are printed.
•
When some characters in a line are double or more height, all the characters in the line are
aligned at the baseline.
•
ESC M can also select character font type. However, the setting of the last
received command is effective.
•
GS ! can also select character size. However, the setting of the last received
command is effective.