Fenix Imvico TK14, Руководство по эксплуатации

Страница: 30 / 59

FENIX IMVICO TK14 OPERATION MANUAL
30/65
4.3- DESCRIPTION OF THE CONTROL COMMANDS
Command List
Command
classification
Command Name
Executing Setting
Page
LF Print and line feed X 31
CR
Print and carriage return X 31
DLE EOT Real-time status transmission X 31
ESC t
Select character code table X 33
ESC SP Set right-side character spacing X 33
ESC !
Select print mode(s) X 33
ESC 2 Select default line spacing X 34
ESC 3 Set line spacing X 34
ESC @
Initialize printer X X 34
ESC E Turn emphasized mode on/off X 34
ESC G
Turn double-strike mode on/off X 34
GS B Turn white/black reverse printing mode on/off X 35
ESC J
Print and feed paper X 35
ESC M Select character font X 35
ESC a n Select justification x 36
ESC c 3 Select paper sensor to output PE signal X 36
ESC c 5 Enable/disable panel buttons X 37
ESC d
Print and feed n lines X 37
GS ! Select character size X 37
GS ( A
Execute test print X 38
GS L Set left margin X 38
GS T
Set print position to the beginning of print line X 39
GS V Feed paper to cut paper line X 39
GS f Select font for HRI characters X 39
GS H Select printing position of HRI characters X 40
GS h Set bar code height X 40
GS k
Print bar code X 40
GS w Set bar code width X 42
GS v 0
Print raster bit image X 42
FS p Print NV bit image X 43
FS q Define NV bit image X 44
Table 4.1- Command List.