Fenix Imvico OP Series, Руководство по установке

Страница: 21 / 35

2.4. Optical Specifications
The test of Optical specifications shall be measured in a dark room (ambient luminance ≤ 1 lux and
temperature = 25±2
℃
) and test unit shall be located at an approximate distance 50cm from the LCD surface
at a viewing angle of θ and Φ equal to 0°. While scanning θ and/or Ø, the center of the measuring spot on the
Display surface shall stay fixed. The measurement shall be executed after 30 minutes warm-up period.
Optimum viewing angle direction is 6 ’clock.
OP12TS OP15TS OP17TS OP19TS
Parameter
Symbo
l
Condition Min Typ Max Min Typ Max Min Typ Max Min Typ Max Unit
Viewing
Angle range
x axis, right(
Φ
=0º )
Θ
r
CR > 10
60 65 - 65 75 - 70 80 - 70 80 - Deg.
x axis, left ( Φ =180º ) Θ l 60 65 - 65 75 - 70 80 - 70 80 - Deg.
y axis, up ( Φ =90 º) Θ u 45 50 - 60 70 - 60 75 - 60 75 - Deg.
y axis, down (
Φ
=270
º)
Θ d 55 60 - 50 60 - 70 85 - 70 85 - Deg.
Viewing
Angle range
x axis, right(
Φ
=0º )
Θ
r
CR > 5
- - - 70 80 - 75 88 - 75 88 - Deg.
x axis, left ( Φ =180º ) Θ l - - - 70 80 - 75 88 - 75 88 - Deg.
y axis, up ( Φ =90 º) Θ u - - - 70 80 - 70 85 - 70 85 - Deg.
y axis, down ( Φ =270
º)
Θ d - - - 70 80 - 70 85 - 70 85 - Deg.
Luminance Contrast ratio CR
Θ = 0°
(Center)
Normal
Viewing
Angle
400 500 - 400 500 - 500 800 - 500 800 -
Luminance of White Yw 300 400 - 200 250 - 250 300 - 250 300 - cd/m2
White luminance uniformity ∆ Y 55 75 75 80 - 75 - - 75 - - %
Reproduction
of color
White
Wx 0.310 0.340 0.370 0.283 0.313 0.343 0.283 0.313 0.343
Typ
-0.03
0.313
Typ
+0.03
±0.03
Wy 0.316 0.346 0.376 0.299 0.329 0.359 0.299 0.329 0.359 0.329 ±0.03
Red
Rx 0.571 0.601 0.631 0.616 0.646 0.676 0.605 0.635 0.665 0.639
Ry 0.314 0.344 0.374 0.313 0.343 0.373 0.312 0.342 0.372 0.342
Green
Gx 0.302 0.332 0.362 0.281 0.311 0.343 0.268 0.298 0.328 0.297
Gy 0.508 0.538 0.568 0.547 0.577 0.607 0.581 0.611 0.641 0.615
Blue
Bx 0.117 0.147 0.177 0.118 0.148 0.178 0.117 0.147 0.177 0.146
By 0.143 0.173 0.203 0.090 0.120 0.150 0.040 0.070 0.100 0.068
Response
Time
Rising Tr - 10 20 - 2 4 - 1.2 2.4 - 1.3 2.6 ms
Falling Tf - 15 30 - 6 8 - 3.8 7.6 - 3.7 7.4 ms
Cross Talk CT - - - - 2.0 - - 1.5 - - - %
Notes:
5. Viewing angle is the angle at which the contrast ratio is greater than 10. The viewing are determined for the horizontal
or 3, 9 o’clock direction and the vertical or 6, 12 o’clock direction with respect to the optical axis which is normal to
the LCD surface.
6. Contrast measurements shall be made at viewing angle of θ= 0° and at the center of the LCD surface. Luminance shall
be measured with all pixels in the view field set first to white, then to the dark (black) state. Luminance Contrast Ratio
(CR) is defined mathematically:
CR =Luminance when displaying a white raster/Luminance when displaying a black raster
7. The White luminance uniformity on LCD surface is then expressed as:
∆Y = ( Minimum Luminance of 9points / Maximum Luminance of 9points ) * 100
8. Cross-Talk of one area of the LCD surface by another shall be measured by comparing the luminance (YA) of a
25mm diameter area, with all display pixels set to a gray level, to the luminance (YB) of that same area when any
adjacent area is driven dark.
2.5. Touch Screen Specification
Parameter
Resolution 4096 x 4096
Touch activation force
Less than 100g (adjust allowed)
Durability Scratch-free;More than 50,000,000 touches in one location without failure.
21/35
E
N
G
L
IS
H
E
N
G
L
IS
H
E
N
G
L
IS
H