Quick Installation Guide
Commercial 50
Copyright by FENECON GmbH
The battery storage system is used to store electrical energy in rechargeable
lithium battery modules (charging) and to provide electrical energy
(discharging). This charging and discharging process is performed by a
connected inverter. All processes of the power storage system are monitored
and controlled by the FEMS
6
Before assembly, note or photograph the
serial numbers
of the individual
components, as these must be documented later at the IBN (in the IBN log or IBN
assistant).
Note
Not all possible system configurations are shown in this
quick installation guide. These can be found on our
website in the download center.
The equipment may only be used in compliance with the permissible technical data.
The installation and maintenance of the equipment may only be carried out by
qualified personnel. These quick installation instructions do not replace the
installation instructions. The installation instructions must be read and understood
before installation.
