background image

1.1.28  Noise prevention

Wear proper hearing protective devices such as

earmuffs or earplugs to prevent loss of hearing

due to high noise levels.

GUID-48B1B90D-20EB-42DB-A016-3CA0AB8AC168-high.jpg [High]

Fig. 15  

1.1.29  Fire and explosion prevention

Use caution when refueling a machine. Do not

smoke while refueling and do not refuel near open

flames or sparks. Always stop engine before

refueling. Fill fuel tank outdoors.
All fuels, most lubricants, and some coolant

mixtures are flammable.
Flammable fluids leaking or spilled onto hot

surfaces or electrical components can cause a fire.
Fire may cause personal injury and property

damage.
Remove all flammable materials such as fuel, oil,

and debris from machine.
Do not let any flammable materials to accumulate

on machine.
Store fuels and lubricants in correctly identified

containers away from not approved persons. Store

rags with oil and any flammable materials in

protective containers.
Do not smoke in areas used for storing flammable

materials.
Do not operate machine near any flame.
Do not weld on lines or tanks that contain

flammable fluids. Do not flame cut lines or tanks

containing flammable fluid. Clean any such lines or

tanks fully with a nonflammable solvent before

welding or flame cutting.
Check all electrical wires daily. Repair any wires

loose or frayed before operating machine. Clean

and tighten all electrical connections.
Dust generated from repairing nonmetallic hoods

or nonmetallic fenders can be flammable and/or

GUID-8FDCA67C-244A-40BA-967B-3FA4E7667A7E-high.jpg [High]

Fig. 16  

GUID-99732186-65C2-4EC3-8EDB-760F7ABE29B7 [V1]

GUID-43C214E0-CE68-4B1B-9480-B36317FC1602 [V3]

1. General

1-14

Rubber Track Tractor

79037495A

Содержание 938 Vario MT




















































Отзывы: