manualshive.com logo in svg

Fender Tone Master PRO, Руководство пользователя

Поделиться
Скачать
Fender Tone Master PRO Скачать руководство пользователя страница 33

GLOBAL SETTINGS

Touch the gear symbol (    ) at upper right to enter the Global Settings menu, where the user can configure a variety of functions to personal 

preference. These functions are organized into several categories arrayed along the bottom of the touchscreen: Preferences, I/O, 

Footswitch, Bluetooth, EQ, Mixer and Tuner.

 

Each category is explained below.

GLOBAL SETTINGS 

31

GLOBAL SETTINGS:

 

USER PREFERENCES

Touch Preferences at the bottom of the Global Settings menu to access these functions:

• RETAIN GLOBAL EQ: 

When on, global EQ settings are retained after Tone Master PRO is turned off and then back on.  

      When off (default), global EQ returns to flat setting after Tone Master PRO is turned off and then back on.

• DISPLAY BRIGHTNESS:

 Gradient slider for adjusting touchscreen, scribble strip and footswitch LED brightness.

• FACTORY RESET:

 Restores all presets and settings to factory specifications.

• ABOUT:

 Displays installed firmware version.

GLOBAL SETTINGS: I/O SETTINGS

Select I/O from the bottom of the Global Settings menu to access these functions. The touchscreen will display Tone Master 

PRO’s rear panel at left and five subcategories: INPUTS, OUTPUTS, EXP/CTRL, USB and MIDI. Touch any of these subcate-

gories for a list of adjustments that can be made in each, as described below.

INPUTS

• INSTRUMENT INPUT PAD (-6dB): 

Reduces instrument level input by 6 dB when ON; helps eliminate clipping when   

      using instruments with active preamps. Default setting is OFF.

• MIC INPUT GAIN: 

Gradient slider for adjusting microphone input gain; for accommodating microphones with varying  

      sensitivities and output levels. Default setting is +9dB (typical for a standard dynamic microphone).

• LINE INPUT GAIN:

 Gradient slider for adjusting line-level input gain; for accommodating instruments and other audio  

      sources with varying output levels. Default setting is 0dB.

• +48V PHANTOM POWER: 

Powers condenser microphones connected to rear-panel XLR input when ON. Default setting is OFF.

• LOOP 3/4 LEVEL: 

Select INSTRUMENT or LINE level for rear-panel effects loops 3 and 4. Default setting is 

      INSTRUMENT (typical for stompbox effect pedals). Select LINE when using rack-mount effects with higher output levels.

OUTPUTS

• OUTPUT 1 LEVEL:

 Select INSTRUMENT or LINE for all four rear-panel OUTPUT 1 jacks. Default setting is LINE (typical    

      when connecting to an FR cabinet, external sound reinforcement or recording equipment). Select INSTRUMENT when     

      connecting to an instrument amplifier.

• OUTPUT 1:

 Select STEREO (default) or MONO operation for all four OUTPUT 1 jacks.

• OUTPUT 2 LEVEL: 

Select INSTRUMENT or LINE for both rear-panel OUTPUT 2 jacks. Default setting is LINE (typical   

      when connecting to an FR cabinet, external sound reinforcement or recording equipment). Select INSTRUMENT when  

      connecting to an instrument amplifier.

• OUTPUT 2: 

Select STEREO (default) or MONO operation for both OUTPUT 2 jacks.

Содержание Tone Master PRO















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды