30
The tuner is accessed by pressing and holding the TAP/TUNER footswitch for two seconds; it can also be accessed manually
on the touchscreen by touching Tuner at the bottom of the Global Settings menu.
The letter name of the note played is shown at bottom center; the tuner shows pitches as flats rather than sharps (i.e., E
♭
rather
than D#). Vertical bars on either side of the longer vertical center bar illuminate yellow to indicate varying degrees of sharp-
ness (to the right) and flatness (to the left). The middle three bars turn green when /- 3 cents of precise pitch. Select any
preset or press the EXIT TUNER footswitch to exit the tuner.
The tuner mutes output by default; this feature can be turned on and off by touching the mute button at lower left and selecting
the preferred option.
The tuner can be applied to the instrument input, the mic/line input or both by touching the INSTRUMENT and MIC/LINE buttons
at lower right.
Access tuner by selecting it
from Global Settings menu
Touch to apply tuner to
INSTRUMENT INPUT,
MIC/LINE input or both
Letter name of note being tuned
Touch to mute output
while tuning
Pitch offset in cents
Degrees of sharpness
shown in yellow at right
Degrees of flatness
shown in yellow at left
Precise pitch indicated in green
in center three bars
