background image

System Set-Up

Congratulations on your purchase of the Fender® Passport® 

Conference audio system. Your Passport is a self-contained, 

Portable audio system that includes everything you need 

for great sound anywhere you go! Carry your Passport as 

you would a suitcase. When you arrive, simply flip open the 

cabinet release latches and inside you'll discover two full-

range speaker cabinets, a powered mixer, a microphone, plus 

all the cables you'll need to get started. 
Use your Passport as a public address system or to amplify 

musical instruments and singing. You can connect a music 

playback device such as an MP3 player, CD player or laptop to 

provide accompaniment. The Passport's quick and easy set-

up, its ability to cover large audiences and its simple operation 

are the hallmarks of this innovative product. The Passport's 

control panel features both mono mic/line channels and 

stereo line channels with a variety of input jacks to provide 

you with superb flexibility in making connections.

Please  visit  the  individual  product  page  for  full  warranty 

details and instructions on how to get your system serviced 

under  warranty  in  U.S.A.  and  Canada;  see  your  Fender 

distributor for warranty details in other countries.

1.

Flip open the cabinet latches on the sides of the

Passport and detach the speaker cabinets from the

powered mixer section.

2.

For optimal results, elevate the speaker cabinets on

Passport Speaker Stands or on sturdy tables and

place the speakers far apart to maximize stereo

separation. Position the mixer close to where you

will be performing so you will have easy access to

the control panel.

3.

Open the storage

compartment on the

rear of the mixer and

remove the micro-

phone, power cord

and speaker cables.

4.

Plug the speaker cables into the left and right

speaker jacks on the back of the mixer, then

connect the corresponding left and right speakers.

Make sure the power switch is off, then plug the

supplied power cord into the power socket on

the back of the mixer and the other end into a

grounded A/C power outlet.

225W

INPUT POWER

T4A H

250V

FUSE

ON

OFF

220-240V~

50/60Hz

100-120V~

50/60Hz

A PRODUCT OF:

FENDER MUSICAL INSTRUMENTS CORP.,

CORONA,  CA  U.S.A.

MADE IN CHINA

CAUTION:

  CHASSIS SURFACE HOT

WARNING:

  TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE

AVIS:

  RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR

AT TENTION:

 SUPERFICIE DE CHASSIS CHAUDE

WARNING:

FENDER  AMPLIFIER  SYSTEMS  ARE  CAPABLE  OF  PRODUCING
VERY  HIGH  SOUND  PRESSURE  LEVELS  WHICH  MAY  CAUSE
TEMPORARY  OR  PERMANENT  HEARING  DAMAGE.  USE  CARE
WHEN SETTING AND ADJUSTING VOLUME LEVELS DURING USE.

TYPE: PR 844

LEFT

RIGHT

SPEAKER OUTPUTS

175W total

4

 MIN 85W

Use only with supplied

4 ohm speakers

ATTENTION:

U T I L I S E R   U N   F U S I B L E   D E

R E C H A N G E   D E   M E M E   T Y P E

E T   C A L I B R E

CAUTION:

TO  REDUCE  THE  RISK  OF  FIRE,

REPLACE FUSE WITH SAME TYPE

AND RATING

SERIAL NUMBER

WARNING:

 

MAINTAIN 6" CLEARANCE

FOR VENTILATION.

Laite on liitettävä suojamaadoituskoskettimilla
varustettuun pistorasiaan
Apparatet må tilkoples jordet stikkontakt
Apparaten skall anslutas till jordat uttag

THIS DEVICE COMPLIES WITH PART 15 OF  FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO 
CONDITIONS:  (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST 
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING  INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

C           US

158744

This product

is covered by

US Patent No.

5,933,507

EN

GL

ISH

Отзывы: