Fender Amp B-DEC 30, Руководство пользователя

Страница: 9 / 156

B-DEC 3O
f e n d e r . c o m
Amp Mode
FX/Reverb Mode
Use FX/Reverb Mode to select an effect type (first menu), then modify that effect’s settings in menus 2–6.
EffectType EffectSettings(for the Effect selected inMenu1)
Menu1 Menu2 Menu Menu4 Menu Menu6
NONE — — — — —
OVERDRIVE Level Gain Low Tone Mid Tone High Tone
FUZZ Level Gain Octave Level Low Tone High Tone
SINE CHORUS Level Rate Depth Reverse Delay Band Split
TRIANGLE CHORUS Level Rate Depth Average Delay Band Split
SINE FLANGE Level Rate Depth Feedback Band Split
TRIANGLE FLANGE Level Rate Depth Feedback Band Split
PHASER Level Rate Depth Feedback Band Split
TOUCH WAH Level Response Minimum Frequency Maximum Frequency Voice Type
FIXED WAH Level Frequency Minimum Frequency Maximum Frequency Voice Type
ENVELOPE CONTROLLED FILTER Level Mode Filter Type Q Threshold
AUTOSWELL Level Attack Depth Response Rate
MONO DELAY Level Delay Time Feedback Brightness Input Level
OVERDRIVE DELAY Level Gain Delay Level Delay Time Feedback
FUZZ DELAY Level Gain Delay Level Delay Time Feedback
CHORUS DELAY Level Rate Depth Delay Time Feedback
FLANGE DELAY Level Rate Depth Delay Time Feedback
PHASE DELAY Level Rate Depth Delay Time Feedback
TOUCH WAH FUZZ Level Gain Response Octave Mix Voice Type
Use FX/Reverb Mode to select a reverb type (menu 7), and adjust reverb level (menu 8).
ReverbType ReverbLevel
Menu Menu8
NONE ------
AMBIENT 1-10
SMALL ROOM 1-10
LARGE HALL 1-10
Use Amp Mode to select an amplifier type (first menu), then modify that amplifier’s settings in menus 2–8.
Menu AmpMenuItems Settings— (Function)
1 AMP TYPE Modern FBA, Dirty FBA, Bassman, Bman Grind, LA Session, Rockin Peg, 80's Tone, Brit Grit, Upright
2 GAIN 1-10 — (Adjusts amplifier distortion level.)
3 AMP VOLUME 1-10 — (Adjusts the volume of the current amplifier relative to other presets.)
4 MID FREQUENCY 200–2kHz — (if AMP TYPE is Modern FBA, or Dirty FBA), 150–4kHz — (if AMP TYPE is Rockin Peg), 200–800Hz — (if AMP TYPE is LA
Session), 275–1kHz — (if AMP TYPE is 80's Tone), N/A - (if AMP TYPE is Bassman, Bman Grind, Brit Grit, or Upright.)
5 CONTOUR 1-10 — ( Adjusts level of Mid-frequency cut,
see diagram A
. Adjusts low pass filter if AMP TYPE is Bassman, Bman Grind, Brit Grit, or
Upright,
see diagram B),
N/A- (if the AMP TYPE is Rockin Peg.)
A B
6 COMPRESSOR Off, Low, Medium, High, — (Moderates volume range and provides sustain.)
7 TIMBRE None, Bass Boost, Bright, Punch, Scoop, Mid Bump — (Tone filters.)
8 NOISE GATE Off, Low, Medium, High, — (Cuts low volume noise.)