9
EARTHING
Correct earthing is very important because total function of the fence system is
dependent on it!
Beat earthing rod with corrosion protection into ground completely at place with maximum
and permanent humidity. On dry pieces of land or in case of soils with lower electric
conductivity, use one or several supplementary earthing rods (with length of minimum
of 1 m) and place them at distance of approximately 3 meters from each other.
Exceptions are fence system powered by battery energizer or working with low output.
Here minimum length of earthing rod of 50 cm is recommended.
Distance of at least 10 meters must be between earthing rod of the fence system and another
earthing system, for example earthing of a house, protective earthing of electric supply system
or earthing of violation alarm.
Do not connect the energizer to already existing earthing or to the the earthing
of another energizer. Each energizer must have its own earthing.
Connection of connectors
The
mini DUO MD
models have only one input connector to connect the power source.
Either for powering with an adapter from the mains or using a battery cable from 12 V battery.
Connection of the output terminals
Connect the
black earthing clip
with the earthing cable to the earthing rod.
Connect the
red clip
with the connecting cable to the fence.
Connector for connect
the adapter or battery.
