10
8. CONTROL
POWER SWITCHING – ON/OFF SWITCH BUTTON
The large switch button is used for basic control. This button turns the energizer on and off
and it can be used to activate the Power save mode, i. e. to extend the interval between pulses.
After switching off and then switching on, the energizer remembers the last set power.
IN SWITCHED-OFF CONDITION OF THE ENERGIZER
long press of button (>2 s)
switching energizer on.
short press of button
no reaction.
IN SWITCHED-ON CONDITION OF THE ENERGIZER
long press of button (>2 s)
manual switching between basic and Power
save mode (approximately 2x longer delay) –
selectable by the user, for
example if it is necessary to save the battery
short press of button
turning off the energizer.
9. EXPLANATION OF THE LED INDICATOR SIGNALS
LIGHT/FLASHING
FLASHING
It signals the operation and flashes in interval of the individual pulses.
RAPID DOUBLE FLASHING
(red)
The battery voltage has dropped below 12 V.
RAPID SHORT FLASHING
(red)
The energizer is switched off and the battery voltage is lower than 11,4 V.
COLOR
Blue
Operation in normal mode.
Purple
Power save mode, extended time between pulses.
Red
Indicates warning and error condition (for example battery voltage drop below 12 V)
or a fence voltage drop below 2.5 kV.
When the battery voltage drops below 11,6 V, a warning siren (beeping) is switched on. If the
voltage drops below 11,4 V, the fence system switched off. The Energizer will only flash rapidly
red and will not give an impulse. The reason is to protect the battery from deep discharge
(battery destruction).
