1.
200W panel
(Art.No. 8147)
– console
(Art.No. 8165)
for mounting post
(Art.No. 8183)
Required material:
• 4 pcs horizontal console
• 1 pc vertical console left
• 1 pc vertical console right
• 12 pcs M5 × 14 mm screw
• 12 pcs M5 nut
• 24 pcs M5 washer
• 2 pcs M10 × 120 mm screw
• 2 pcs M10 wing nut
Vertical console left
Vertical
console right
Horizontal
consoles
1.1
Console assembling
Take the two horizontal parts of the console and put them over each other through, so
you have the eight holes as shown in the drawing, put M5 × 14 mm screw in one pair
of holes, 2 pcs M5 washer, and add one vertical part of the console. After catching
the nuts, add the other vertical part in the same way. In the same way, screw the two
horizontal parts to the other end of the vertical parts. Do not tighten the nuts.
This process of mounting of the 200 W solar
panel is also used when combined with a
portable box
(Art.No. 8161)
.
17
