1.3 Mounting to the mounting post
For mounting on a mounting post, we use a solar panel with a consoles. Mount the
panel with the consoles on a mounting post screwed into the ground, so that the
plates of the screw are horizontal on the outside of the consoles. Secure the panel
in the marked holes, through both sides of the screw and both vertical parts of the
bracket with an M10 × 120 mm screw and an M10 wing nut. To secure tilt of the panel,
fit a second M10 × 120 mm screw and an M10 wing nut, according to one of the three
positions as shown. The screws must pass through all parts of the console and the
mounting post.
By using the top screw, you
can adjust the solar panel to
three tilt positions.
·
2 pcs M10 × 120 mm screw
·
2 pcs M10 wing nut
20
