Fema M Series, Руководство пользователя, Страница: 9 / 36

FEMA ELECTRÓNICA . SERIES M . M60-LC
9
The instrument has two menus accessible to the user :
‘
Configuration menu
’ (key ‘SQ’) (
<
)
‘
Fast access
’ menu (key ‘UP’) (
5
)
Configuration menu
The ‘
configuration menu
’ modifies the configuration pa -
rameters to adapt the instrument to the application needs.
To access the ‘
configuration menu
’ press for 1 second the
‘SQ’ (
<
) key. This access can be blocked by activating the
‘ Password ’ (‘ PASS ’) function. While operating the ‘
configu-
ration menu
’, the alarm status is ‘hold’ to the status it had
before accessing the menu, and the output and control
modules remain in ‘
error
’ state. When leaving the ‘
configu-
ration menu
’, the instrument applies a system reset, fol -
lowed by a brief disconnection of the alarms and the out -
put and control modules. Functionality is then recovered .
For a detailed explanation on the ‘
configuration menu
’ see
the following sections, and for a full view of the ‘
configura-
tion menu
’ see section
1.13
.
‘Fast access ’ menu’
The ‘
fast access
’ menu is an operator configurable menu,
providing fast and direct access to the most usual functions
of the instrument with a single key pad stroke. Press key
‘UP’ (
5
) to access this menu .
See section
1.12.15
for a list of selectable functions for
the ‘
fast access
’ menu in this instrument. The ‘
Password
’
(‘ PASS ’) function does not block access to this menu. Ac -
cessing and modifying parameters in the ‘
fast access
’ menu
does not interfere with the normal functionality of the in -
strument, and it does not generate any system reset when
validating the changes.
Operating with the front keypad inside the menus
Key ‘SQ’
(
<
) - press the ‘SQ’ (
<
) key for 1 second to ac -
cess the ‘
configuration menu
’. Inside the menu, the ‘SQ’
(
<
) key acts as an ‘
ENTER
’. It enters into the menu option
selected, and when entering a numerical value, it validates
the number .
Key ‘UP’ (
5
) - press the ‘UP’ (
5
) key to access the ‘
fast ac -
cess
’ menu. Inside the menu,the ‘UP’ (
5
) key sequentially
moves through the available parameters and menu entries.
When entering a numerical value, it modifies the digit se -
lected by increasing its value to 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 .
Key ‘LE’ (
3
) - press the ‘LE’ (
3
) key to activate the con -
figured special functions associated to this key. Inside the
menu, the ‘LE’ (
5
) acts as an ‘ESCAPE’. It leaves the select -
ed menu level and eventually, by leaving all menu levels, it
1.12 Configuration
1.12.1 How to operate the menus
leaves from the configuration menu. Then changes are ap -
plied and the instrument is back to normal function. When
entering a numerical value, it selects the active digit, and
the value is then modified by key ‘UP’ (
5
).
‘ Rollback ’
After 30 seconds without interaction from the operator, the
instrument will rollback and leave the ‘
configuration menu
’
or the ‘
fast access
’ menu. All changes will be discarded .
(2)
(3)
(3)
(3)
(3)
(3)
(4)
(4)
(4)
(4)
(5)
(5)
(5)
(5)
(3)
(3)
(6)
(6)
(1)
Example of operation inside
the ‘ configuration menu ’.
1. The (
<
) key enters into
the ‘configuration menu’.
2. The (
<
) key enters into
the ‘ InP ’ menu.
3. The (
5
) key moves
through the menu op -
tions.
4. The (
<
) key selects the
desired range and returns
to the ‘ InP ’ menu.
5. The (
3
) key leaves the
actual level and moves to
the previous menu level.
6. The (
3
) key leaves the
‘configuration menu’.
Changes are applied and
saved at this moment.
Figure 5 - Example of operation inside the ‘configuration
menu’ (menu entries are given as example, and may not be the
exactly the same as the instrument menu entries).