1. Basic Equipment of the Thermostats
MU2B-0375GE51 R0616C
43
1.2 Assembly and Mounting
Wall Installation
With wall bracket H1 (included as
standard with room thermostats type
TRM). For wall installation of TX and
TAM, H1 bracket needs to be ordered
separately. This is valid for all versions
with housing 2…, 3…, 5…, and 7… (Ex).
Fig. 1. Wall mounting 2...
Fasten holding bracket (1)
horizontally on wall by means of
screws and plugs (6 mm Ø).
Fasten terminal plate (3) by means of
2 M4 screws on the reverse side of
the switching unit (do not tighten –
maintain approx. 2 mm distance
between housing and terminal plate).
Hang housing on the bracket and
clamp it with two M4 screws.
The thermostats can also be fixed directly
by means of 2 screws (4 mm Ø) on a flat
surface (without wall bracket H1).
