Page : 4
2.- UNPACKING AND INSPECTION
It is advisable to do a detailed reading of this Manual before mounting the instrument. This Operator's Manual
contains all the technical specifications : electricals as well as mechanics, both necessary to do a correct
installation and also a good use of the instrument.
At the same time the user will acquire the knowledge needed to obtain the best performances of the product.
Check that inside the present cardboard box, there are the following :
1 Instrument Model BDF-XX-T1, T2, T3, T5, T6 or TF.
1 Operator's Manual.
1 Connector for Power Supply.
1 Screw-clamp connectors, 5 pins female for signal inputs.
2 Pieces for fixing the unit against the panel.
If there are some doubts or enquiries about the present instrument, please contact with your Local Distributor
or with
FEMA electrónica, s.a.
When the shipment is arrived remove the Packing List and verify that you have received all equipment.
Then inspect the box and the instrument, and if there is evidence of damage caused by bad handling during
the transport, it is advisable to make a careful inspection of all damages making a note of all of them and to
pass on this information directly to the Transport Company.
If this occurs but with insured material, ask the Transport Company for instructions about submitting a claim.
3.- MAIN FEATURES
The Large Displays for Totalizer and Rate are made up by four different series. The main features of
each serie are the following :
Serie BDF-24-XX
: 4 digits type LED, seven segments, red or green colour with 57 mm (2.3") height
and minus sign for polarity.
Serie BDF-26-XX
: 6 digits type LED, seven segments, red or green colour with 57 mm (2.3") height
and minus sign for polarity.
Serie BDF-44-XX
: 4 digits type LED, seven segments, red or green colour with 100 mm (4") height
and minus sign for polarity.
Serie BDF-46-XX
: 6 digits type LED, seven segments, red or green colour with 100 mm (4") height
and minus sign for polarity.
The complete reference for each instrument is obtained replacing the ""XX" by the corresponding
references for every Model (T1, T2, T3, T5, T6 & TF). See paragraph 4.