8
FELTON
2
Attaching the Control Housing
Prepare the wall to take the Control Housing. The installation of the Control Housing will depend on each
individual situation.
Control Housing attached from the front: a 70mm diameter hole is required in a fixing
nog flush with face of the timber framing. Conduits should be used in the walls where necessary to protect
the cables and allow maintenance.
Attach the Control Housing using the screws supplied.
Control Housing attached
from the front
NOG
NOTE: We recommend the in-wall box is cut down as shown using a hacksaw
1
Cutting down the Control Housing (OPTIONAL)
CONTROL UNIT PRE-LINE INSTALLATION
