It is essential that the
mounting brackets are
installed in a vertical
position as shown.
Mount the rail onto the brackets in place. Ensure
that both rail and bracket are secured.
It is recommended that silicone sealant be used to
seal the fixing brackets.
Tighten the grub
screws on rail with
an allen key.
Screw the elbow into the water outlet (wingback).
Sealant required on thread to achieve a water tight
seal.
For Mains Pressure, fit flow restrictor into the
handpiece first.
Screw the hose onto the elbow and
handpiece and attach the handpiece to the slider on
the rail.
1.
3.
4.
2.
HOW TO INSTALL
INSTALLING INTO STUD/NOG...(RECOMMENDED)
Untighten the grub
screws from the rail
with an allen key.
Remove the brackets
from the rail.
Mount the brackets into position (605 Centre -
Centre).
5.
8.
9.
INSTALLING INTO CONCRETE/BRICK WALL...
Pre-drill holes to 605 Centre - Centre
and fit the wall anchors then follow
the above instructions.
685mm C-C
685mm C-C
