mode is indicated when you are changing delay by the word
"FINE" and also that a decimal digit is shown after the delay, e.g.
FINE
Note, the decimal digit is only shown during adjustment of the
delay. Pressing the SHOW/HIDE button will show the digits
before the decimal place only.
Input B
You can leave Fine Delay Adjustment by pressing
on-screen display is showing. Fine Delay Adjustment is also
exited automatically after 10 minutes of
the power to the HD940 is interrupted.
Presets
The HD940 allows storage of up to 3
recall, 8 for each input.
buttons on the remote control. Presets are retained even if
power to the HD940 is lost.
Storing a Delay in a Preset
1.
Press
2.
The current delay will be shown in yellow
120 ms
3.
Select the preset to store the delay using either the
buttons, or the discrete preset buttons
Preset
4.
Press
. The
the preset is stored. After a couple seconds the on
display will disappear
Before pressing
the delay then press
disappear and the delay will not be stored.
mode is indicated when you are changing delay by the word
"FINE" and also that a decimal digit is shown after the delay, e.g.
105.7 ms
Note, the decimal digit is only shown during adjustment of the
he SHOW/HIDE button will show the digits
before the decimal place only.
B 105 ms
You can leave Fine Delay Adjustment by pressing
screen display is showing. Fine Delay Adjustment is also
exited automatically after 10 minutes of no button presses or if
the power to the HD940 is interrupted.
40 allows storage of up to 32 delay settings for easy
for each input. Presets are stored and recalled using
buttons on the remote control. Presets are retained even if
40 is lost.
Storing a Delay in a Preset
The current delay will be shown in yellow
120 ms
Select the preset to store the delay using either the
or the discrete preset buttons
through
5 120 ms
The display will change to white indicating that
the preset is stored. After a couple seconds the on
display will disappear
in the steps above, if you decide not to store
the delay then press
or
. The on-screen display will
disappear and the delay will not be stored.
19
mode is indicated when you are changing delay by the word
"FINE" and also that a decimal digit is shown after the delay, e.g.
Note, the decimal digit is only shown during adjustment of the
he SHOW/HIDE button will show the digits
when no
screen display is showing. Fine Delay Adjustment is also
no button presses or if
delay settings for easy
Presets are stored and recalled using
buttons on the remote control. Presets are retained even if
Select the preset to store the delay using either the
and
through
display will change to white indicating that
the preset is stored. After a couple seconds the on-screen
in the steps above, if you decide not to store
creen display will
