4
TROUBLESHOOTING
LIMITED WARRANTY
Fellowes warrants all parts of the machine to be free of defects in
material and workmanship for 1 year from the date of purchase by
the original consumer. If any part is found to be defective during the
warrant period, your sole and exclusive remedy will be repair or
replacement, at Fellowes’ option and expense, of the defective part.
This warranty does not apply in cases of abuse, mishandling or unau-
thorized repair. ANY IMPLIED WARRANTY, INCLUDING THAT OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS
HEREBY LIMITED IN DURATION TO THE APPROPRIATE WARRANTY
PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for
any consequential or incidental damages attributable to this product.
This warranty gives you specific legal rights. You may have other
legal rights that vary from state to state.
For more detail or to obtain service under this warranty, please con-
tact Fellowes Customer Service at 1-800-955-0959, Monday through
Friday, 8 AM - 5 PM (Central Standard Time).
For specific instructions on obtaining service under this warranty on
machines purchased outside the USA, contact the appropriate location
listed in the
Contact for Service
section of this instruction manual.
Warrantor: Fellowes, Inc.
a. Shredder is not plugged in.
b. Power switch is in the
OFF
(O) posi-
tion. Move switch to
AUTO
(I) posi-
tion.
c. Shredder is jammed. See “Clearing
a Jam” section.
d. Shredder has exceeded the maxi-
mum run time and requires a “cool-
down” time. See “Product Usage
Guide”
(page 1).
a. Shredder has exceeded the maxi-
mum run time and requires a “cool-
down” time. See “Product Usage
Guide”
(page 1).
b. Shredder is jammed. See “Clearing
a Jam” in the
OPERATION section.
A small piece of paper may be blocking
the auto-start sensor of this shredder.
Move the power switch to the
OFF
(O)
position and
unplug the shredder
. Turn
shredder over and use a toothpick (
from
the underside of the unit
) to clear the
paper blockage at the auto-start sensor
(center) location .
A small piece of paper may be causing
the auto-start feature to run continuous-
ly. Move the power switch to the
OFF
(O)
position and
unplug the shredde
r. Use
a toothpick (
from the top of the unit
)
to clear the paper blockage at the auto-
start sensor (center) location .
Shredder will not
operate.
Shredder suddenly
stops while shred-
ding.
Shredder operates
only in REVERSE.
Shredder runs contin-
uously when in
AUTO.
