Fellowes Array AR1, Инструкция по установке

Страница: 4 / 16

4
Coil and wrap remaining cable out of the way.
Do not trim excess cable lengths.
Re-install the cross-tee.
Ensure power switch located on the power supply
is in the off position before proceeding with
connecting any wires.
Have a qualified electrician connect the ground,
line, and neutral to fixture per local electrical codes.
Turn on power supply switch.
Now the unit is set up and can be controlled with
the buttons behind the filter door.
All wirings connected in junction box should be
connected with twist connectors.
Working from above the unit, attach a
UL approved straight or 90° elbow to
connect conduit.
Tape off the hook slots as shown.
16
17B
17B
Unit AC Input
Black
Line
Ground
Neutral
Green
White
2
3
4
17C
18 19
UV B
ULB
RES
ET
FIL
TER RES
ET
UV B
ULB
RES
ET
FILT
ER
RES
ET
UV BUL
B RESE
T
FIL
TER RESE
T
UV BULB RESE
T
FILTER RESE
T
UV BULB RESE
T
FILTER RESE
T
UV BULB RESE
T
FILTER RESE
T
17A
Check below unit for visible gaps. If needed, add
centering blocks between unit and grid. Trim out
as desired.
Rotate and lift all the way through the grid
until until fixture can be straightened above
the ceiling grid ensuring bottom panel is not
damaged.
With one person supporting fixture so it just
touches the grid, the other should pull the aircraft
cables until taut.
WARNING: Grid is not meant to support
weight of product.
13
14
15