Fellow Kogyo FOCAS-2000, Инструкция по эксплуатации

Страница: 18 / 40

Page. 17
6
.
䎃
Setting
䎃
䦟
6-3. 䎃
Various settings
䎃
(Setting)
䎃
Ɣ You can change settings according to your operating conditions.
Ɣ Keep on pressing "Esc" for 2 seconds or longer in the standby state to change settings.
Ɣ You cannot change settings in the Operation mode.
䦟
6-3-1.
Setting data and ranges
Setting data
Setting items Variable range Step
Value set at
factory
shipment
Units
Warming-up time
Warming up 30
䎃
to 300 1 30 sec.
Oil alarming point 1
(alarm signal 1/AL1 lamp)
Oil Alarm 1 5
䎃
to 15 1 15 ppm
Oil alarming delay 1
(alarm signal 1/AL1 lamp)
Alarm 1 Delay 0
䎃
to 5 1 0 sec.
Oil alarming point 2
(alarm signal 2/AL2 lamp)
Oil Alarm 2 5
䎃
to 15 1 15 ppm
Oil alarming delay 2
䎃
alarm signal 2/AL2 lamp)
Alarm 2 Delay 0
䎃
to 600 10 0 sec.
Alarm suppression
(during warm-up, washing operation, and setting)
Alarm Suppress
Alarm output : OFF /
Alarm suppression: ON
---
ON
(Alarm suppression)
---
Washing timer (automatic washing time)
Auto Washing Time 30
䎃
to 600 1 60 sec.
Washing timer (manual washing time)
Man. Washing Time 10
䎃
to 600 1 50 sec.
During standby
Stand by Current 0
䎃
to 4 1 0 mA
During washing
Washing Current 0
䎃
to 4 or 20 to 24 1 4 mA
Exceeding the oil alarming point
Over Oil Alarm Density or 20 to 24 1
Densit
mA
Exceeding the oil concentration of 30
ppm (measuring limit)
Over range Current 20
䎃
to 24 1 20 mA
During setting
Maint. Current 0 or 20 to 24 1 0 mA
RECout
With equipment fault
Defect Current 0 or 20 to 24 1 0 mA
䎃
Setting method
Standby
䎃
5VCPFD[
ZZZZZZ AA ZZZZZZ
Keep on pressing "Esc" for two seconds or longer in the standby state.
Clock adjustment menu
/CKP A /GPW AAAAAAAAAAAAAAAA
%NQEM 㨉 #㨎㨔WUVOGPV AAAAAA㨉㨉A
A clock adjustment item is displayed. Press "Ÿ."
䯴
Return to standby press "Esc"
䯵
Setting menu
/CKP A /GPW AAAAAAAAAAAAAAAA
5GVVKPI AAAAAAAAAAA㨉AAAAAA
A setting menu item is displayed. Press "Enter."
䯴
Return to standby press "Esc"
䯵
Warm-up time setting
screen
5GVVKP㨑 㨉㨉㨉㨉AAAAAAAAAAAAAA
9CTOKPI A WR AAAAAAAAA ZZZUGE
Press "Enter."
䚚䎃
This example sets a warm-up time.
䎃
The cursor blinks at a digit you can enter a value.
Changing a set value
5GVVKP㨑 㨉㨉㨉㨉AAAAAAAAAAAAAA
9CTOKPI A WR AAAAAAAAA ZZZUGE
The cursor blinks at a value entry digit ("xx" in the example).
Select a value by using "ź" or "Ÿ" and press "Enter." The value is
set and changing ends.
䎃
Returning to the setting
item screen
5GVVKP㨑 㨉㨉㨉㨉AAAAAAAAAAAAAA
1KN#NCTO AAAAAAA ZZRRO
Press "Ÿ." The next setting item is displayed on screen.
䎃
Ɣ The above setting method in a black box is also applicable to the other setting items. (see the next page for the other setting items.)
Ɣ Press "Esc" to stop the setting operation halfway. The setting item screen is displayed back.
The new setting becomes valid after it is saved. Select the screen below and press "Enter" to save it.
%#76+10
5GVVKP㨑 㨉㨉㨉㨉AAAAAAAAAAAAAA
5CXG A RCTCO RTGUU A 'PVGT
…(see "Caution" on the next page.)