Fellow Kogyo FOCAS-2000, Инструкция по эксплуатации

Страница: 21 / 40

Page. 20
8
.
Maintenance and Checking
■
Continued from the preceding page (8-1-1. Manual operation (Manual running))
When "manual running" is selected.
The left screen is displayed for about 5 seconds and the manual operation process starts.
"Warming up" is displayed on the bottom line of the screen.
The remaining time (in seconds) is displayed to the right of "Warming up."
(Keep on pressing "Esc" for 5 seconds or longer to stop the manual operation process halfway.)
The oil concentration in the operation process is displayed together with the ON/OFF state of the
three-way valve output signal.
Press "Esc" for 2 seconds. The manual operation process ends and the oil concentration
detector goes to washing process.
The remaining time (in seconds) is displayed to the right of "Washing."
When the washing process ends, the oil concentration detector waits for judgment of cleanliness
of the detection tube. "Wait Stable" is displayed together with the remaining time (in seconds)
to the right of "Wait Stable."
After the judgment ends, the screen to select a manual operation item of the testing function is
displayed back.
Press "Esc."
"Main Menu" is displayed back.
Press "Esc."
The oil concentration detector enters the standby state.
Regarding details of warning please see P35 9.Troubleshooting
With this, the manual operation process is completed.
A. Normal with the clean glass
→Manual running
(
The screen to select a manual
operation item of the testing
function is displayed back )
B. Glass is stained
→ Warning: cell too Dirty
C. Glass is stained heavily
→ Warning[112] Adhesion of dirt