3
Operating instruction
[Inspection before start]
1.
The power cord shall not be damaged or fractured.
2.
This machine uses 220-240V AC power so please verify the rated current
of the power socket is in line with the requirements in the table above and
is equipped with a safety grounding device before use; otherwise, replace
the socket.
[Start and power selection]
1.
Start
Plug in the power, clockwise turn the thermostat knob to the “ “ mark
position, then turn on the power switch, the heater starts to work.
2.
Power selection
Under normal circumstances, please use the maximum power “III” gear for
rapid heating. If the room temperature reaches a suitable temperature,
please choose a lower power “II” or “I” gear to reduce energy consumption
so as to prevent the room becoming overheated.
[Note]
To use the machine for the first time or to re-insert the socket, please pay
attention to check whether the plug and the socket are fitted well.
<Inspection method>
Insert the power plug into the socket and start for use; after about half an
hour, turn off and pull out the plug. Check whether the plug pins are hot;
replace the socket if so (more than about 50 °C) to avoid burning the plug
or even causing a fire caused by overheating of the socket due to poor
contact.
3.
Place the heater upward after it is installed securely with the wheels
touching the ground.
Содержание OR 23110
