Fell WiMEA, Руководство пользователя

Страница: 14 / 44

26
Boat Unit Components Mounting the Boat Unit
1. Remove the Boat Unit Nut by turning it off.
2. Attach the External Antenna by turning it onto the
antenna connector at the bottom of the Boat Unit.
3. Drill a hole in your helm for the Boat Unit. Use
standard 52 mm hole cup drill to make the hole.
4. Lead the Boat Unit Cable and External Antenna
into the hole and thereafter place the Boat Unit in
the hole.
5. Place the gasket between the flange under the top
of the Boat Unit and the surface of the helm/wall
surrounding the hole.
6. When positioning the Boat Unit in the helm or
other suitable place, make sure to set the direction
of the Boat Unit with the battery indicator at
12 o’clock and the FELL printing at six o clock.
7. Tighten the Boat Unit Nut from behind to securely
attach the Boat Unit in the helm. The Boat Unit
Nut is fitted by using normal hand force.
8. Attach the Boat Unit Cable and the Connection
Cable by connecting the male and female 5-Pin
Connectors together on the two cables.
9. Proceed to connecting the wires, see page 30
“Connecting the wires”.
Be sure not to drill through any existing cables or
equipment mounted or situated on the backside of
your intended Boat Unit position! NOTICE
27