Felix Storch Pro 3, Быстрый старт

Страница: 16 / 28

Quick Start Guide FELIX Pro 3
Page
15
Load Filament
Ensure the end of the filament is cut off in a skew manner, so the extruder can easily grip the filament.
Go to the Control menu Select the extruder which you
want to use.
E1:20°C E2:21°C B:20°C
Back
>Control
Print
Settings
E1:20°C E2:21°C B:20°C
Dual Preheat/Cool
Remove Build PLT.
>Change filament
Level Build PLT.
Calibrate Extruders
Scroll down to Change Filament
and press button to access the
menu
E1:20°C E2:21°C B:20°C
Change Filament
Back
>Extruder 1
Extruder 2
Scroll down to the material you
want and press to select it.
NOTE:
When Changing to a new
material with a lower
temperature, purge the extruder
with the previous temperature for
at least 30cm to prevent clogging
of the nozzle.
E1:20°C E2:21°C B:20°C
>PLA
PETG
PVA
FLEX
ABS-X
Feed the filament through the extruder
by rotating the button clockwise until a
small thread comes out of the nozzle.
Use the tweezers to remove the thread
of filament.