Felix Storch Food 1.5, Быстрый старт

Страница: 2 / 53

Page
1
Guide FELIX Food V1.5
1 Safety
General safety
- Keep children under the age of 14 out of reach of the printer.
- FELIXprinters are only suitable for professional use.
Considerations when in operation.
- Don’t leave the printer unattended, before making sure the
first layer is printed properly.
- Don’t lean on the printer.
- Be careful with long hair and wide clothes.
- Don’t transport the printer while printing.
- Make sure all moving parts can move without any obstructions.
- Don’t remove any objects from the hot plate while printing.
- Caution with any moving parts that move in the X, Y and Z
direction. Moving parts can have a pinching hazard.
Electronic safety
- Only use the power supplies and cables supplied by
FELIXprinters. Always turn off and unplug the printer before
performing maintenance or modifications.
- The power supply meets all CE mark regulations and is
protected against short-circuit, overload, over voltage and
over temperature.
Printer placement
- Place the FELIXprinter on a stable table/desk or something with
a similar height.
- Place the printer on a height where children cannot
reach it.
- Use the FELIXprinter in a clean environment at room
temperature.
Caution with harmful print media
- Some media can be toxic or harmful when consumed. FELIXprinters
is in no way responsible for harm by poisoning when printing
objects with poisonous media. The responsibility for
consuming printed media rests entirely with the end-user/consumer.
Caution with heater elements
- There is a potential risk of burning, as the print head and bed add-on
module can reach temperatures of up to 80°C and the standard
heated bed up to 90°C.
- Always let the printer cool down for at least 5 minutes before
doing maintenance or modifications.