Felix Storch Food 1.5, Быстрый старт, Страница: 51 / 53

Page
50
Guide
FELIX
Food V1.5
CALIBRATION
“ When do I need to level my bed ? ”
- It is wise to level the bed when the machine has just come out of the box. It can also be useful to level the bed when the
machine is moved. For the rest, it is only necessary to level the bed if the first layer of the print is not nice and smooth. (step 10.1)
“ When do I perform a Z=0 calibration? ”
- The Z=0 calibration is already very finely adjusted in the factory during the test phase of the machine. It may still
happen that the syringe needle scrapes on the bed, in which case, a Z=0 calibration is required. (step 10.2)
“ When do I perform a XYZ calibration? ”
- There are several reasons to perform an XYZ calibration. First, it may be that nozzle 1 prints fine but
nozzle 2 scrapes across the bed/print. Second, nozzle 1 and nozzle 2 may not align nicely over the XY direction. It is
advisable to perform an XYZ calibration for every dual color print to guarantee the best result. (step 10.3)