F-751 Avocado Operation Manual Rev. 1/25/2023
Page
|
24
Felix Instruments
1554 NE 3rd Ave
Camas, WA 98607, USA
Phone: +1 (360) 833-8835
Fax: +1 (360) 833-1914
www.felixinstruments.com
[email protected]
Updating The F-751
Updating Device Firmware
Note: Offset calibration is always recommended after installing new
firmware or before using new apps. The offset calibration procedure is
Consult Felix Instruments support with any
questions.
1.
Verify the firmware to be installed is compatible with the quality
meter hardware version.
a.
Refer to the Version Table on the Product Support >
Downloads page.
2.
Download the firmware from the Product Support > Downloads
page. Unzip the file onto your computer if necessary.
3.
Determine and download the compatible app or model for the
firmware to be installed. Refer to the Version Table on the Product
Support > Downloads page. Unzip the app file onto your computer
if necessary.
a.
Note: The user may use their own apps or apps from
previous builds. Please contact customer support for
compatibility considerations.
4.
Power ON the F-751 and ensure all the measurements on the
device are archived to the SD Card.
5.
Power OFF the device, remove the SD Card and insert it into the
computer.
6.
Copy the entire contents of the SD Card onto the computer.
7.
Delete the contents on the SD Card EXCEPT any file that begins
with “
F75XSettings
”. Deleting the contents of the SD Card is
optional however promotes a cleaner environment for saving
measurements with the new firmware and apps.
8.
Copy the desired apps to be used onto the SD Card (refer to step
3)
.
9.
Reinsert the SD Card back into the F-75X.
10.
Connect the F-75X to your computer using the micro-USB to USB-A
cord that was provided with your instrument. Note: Ensure the
device batteries are charged to at least 50% before starting the
firmware update.
11.
Open the firmware update file that was downloaded and unzipped
in step 2.
12.
Follow the on-screen instructions to update your device.
