Felisatti RH26/36CVR, Оригинальное руководство пользователя

Страница: 10 / 81

10
Stopper Stopper holder 2.
1.
3.
Left-hander should detach the tool holder
assembly and assemble the side handle in
reverse direction and position before starting
operation.
7. Attaching and Detaching Tool Bit
Be sure to wear protective gloves for
changing hot tool bit during operation.
Be sure to put off the switch and unplug
power cord before attaching or detaching
a tool bit.
Attaching and Detaching SDS-plus Bit
1. Wipe the bit and insert clean and coat grease
before attaching it.
2. Check dust cap for clean. Change the dust cap
with new one if it’s broken and clean it.
3. After inserting the bit, turn to a position you
hear click.
4. After attaching the bit, test to pull it out to check
for firm attachment.
5. To detach the bit, turn the retainer in direction of
arrow and remove.
Grease
Retainer
Removing Tool Holder and Attaching Quick
Change Drill Chuck
For safety purpose, remove the stopper from side
handle and bit from the tool.
When changing tool holder and quick change
drill chuck, position the change lever in “Hammer
Mode”.
1. Put the forward/backward lever in neutral
(locked) or remove the battery.
2. Turn the tool holder counterclockwise and then
remove it from the main body.
3. After assembling the quick change drill chuck to
the main body, pull the adapter cover clockwise to
a position you hear click.
Tool Holder Cover