Felisatti DC10,8L2, Оригинальное руководство пользователя

Страница: 19 / 94

19
Battery
On/Off switch
Rotation direction switch
Chuck
Torque adjustment ring
Speed selector switch
Work light
Housing
Figure 1
Figure 2
Figure 3
Figure 4
Figure 7
Figure 10 Figure 11
Figure 9
Figure 8
Figure 5 Figure 6
It is essential that instruction
manual is read before the power
tool is operated for the first time.
Always keeps this instruction manual together
with the power tool.
Ensure that the instruction manual
is with the power tool when it is
given to other persons.
Table of Contents
1. General Power Tool Safety Warnings...............3
2. Specific Safety and Warnings.............................4
3. Check before Use..............................................6
4. Specifications and List of Contents.....................6
5. Noise and vibration............................................7
6. Description of Functions and Applications...........7
7. Operating Instructions.......................................7
8. Maintenance....................................................9
General Power Tool Safety Warnings
Never modify the plug in any way.
Do not use any adapter plugs with
earthed(gorunded) power tools.
Unmodified plugs and matching outlets will
reduce risk of eteclric shock.
b)Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to rain
or wet codltions.
Water entering a power tool will
increase the risk of electric shock.
d)Do not abuse the cord. Never use the cord
carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for
outdoor use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing
and use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication.
A moment of inattention while operationg
power tools may result in serious personal
injury.
b) Use safety equipment. Always
wear eye protection.
Safety equipment such as dust mask,
non-skid safety shoes, hard hat, or
hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off position before
connecting to power source and/or
battery pack, picking up or carrying the
tool.
Carrying power tools with your finger on the
switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on.
A wrench or key left attached to a rotating
part of the power tool may result in personal
injury.
WARNING! Read all safety
warning and all instructions.
Failure to follow the warning
instructions may result in electric shock, fire and/or
seroius injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to
your mains -operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose
control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Note
As our engineers are striving for the
constant research and development to
develop the quality of products, shape or
structure of our model can be changed
without previous notice.