66
Troubleshooting
11 Troubleshooting
11.1 What to do in the event of malfunctions
WARNING
Improper troubleshooting
Severe injuries and damage to property
−
Troubleshooting may only be carried out by authorised, trained
personnel who are familiar with how to operate the machine
and are in strict observance of all safety instructions.
In the event of malfunctions that pose an immediate threat to persons, equipment
or operational safety:
1.
Stop the machine immediately by pressing the red
[Stop]
button.
2.
Disconnect the machine from the mains and ensure it can not be switched
on again.
3.
Have an authorised specialist determine the cause and repair the malfunc-
tions.
11.2 What to do after rectifying the fault
Check,
1.
if the malfunction and cause of the malfunction have been professionally
remedied.
2.
whether all safety equipment has been installed in accordance with regula-
tions and are technically and functionally in perfect condition.
3.
whether, there are no individuals located within the danger area of the
machine.
11.3 Adjust the sanding belt height
The run of the sanding belt is set at the factory.
WARNING
Running sanding belt
Through contact with the running sanding belt it could cause
serious cut or abrasion injuries.
−
Avoid contact with the running sanding belt.
Set the run of the sanding belt higher
Tool:
●
Hex key
●
Combination spanner
1.
Dismount cover.
Содержание FS 700 K
Страница 6: ...6 Table of contents...
Страница 59: ...59 FS 700 K Use 4 Switch machine on...
Страница 75: ......
