17
!
!
!
Multi Boring Machine
FD 21 professional
Attention! Risk of material damage!
Transport the machine according to the enclosed transport and assembly instructions!
Do not lift the machine by its work table, extension frames or handwheels.
4.5.1 Transport locking device
Fig. 4-1: Transport locking device
4.5 Transport
4.4 Storage
Keep items sealed in their packaging until they are
assembled/installed and be sure to observe the stacking and storage symbols on the outside of the packaging.
Store packed items only under the following conditions
• Do not store outdoors.
• Store in a dry and dust-free environment.
• Do not expose to aggressive substances.
• Protect from direct sunlight.
• Avoid subjecting the machine to shocks.
• Storage temperature: -10° to +50° C.
• Maximum humidity: 60 %.
• Avoid extreme temperature fluctuations (condensation
build-up).
• Apply a coat of oil to all bare machine parts (corrosi-
on protection).
• When storing for longer than 3 months, apply a coat
of oil to all bare machine parts (corrosion protection).
Regularly check the general condition of all parts and
the packaging. If necessary, refresh or re-apply the
coat of
anti-corrosive agent.
• If the machine is to be stored in a damp environment,
it must be sealed in air-tight packaging and protected
against corrosion (desiccant).
Note:
The transportation width is well under 1000 mm. This makes it possible to transport the machine through
doorways.
The machine is partly assembled when delivered on the
pallet
The machine is mounted to the pallet with transport
brackets.
Only remove the brackets once the machine is to be
removed from the pallet.
Never lift the machine by its protruding parts.
The machine must only be moved using a forklift or a
pallet truck.
!
Transport brackets
Transport, packaging and storage
