2. Quick Start Guide
Charging
1
3
2
Charging with Micro USB cable as shown
below.
Please fully charge the battery before
power on the gimbal for the first time.
TIPS
03
www.feiyu-tech.com
Micro USB
Cable
(Equipped by user)
Output: 5V / 2A
Mount the Camera
Put the camera on mounting plate,then
tighten the camera with retainer bar(or
session mount) and screw.
Use fixing bar to install
Use session
holder to install
Balance the Gimbal
Loosen the knob ring, move and adjust the position of
cross arm, tight the knob ring after the gimbal is in
balanced status. Then turn on the gimbal.
(
Before power on
)
4
Power on / off
1
2
Cross Arm
Knob Ring
Power on：
long time press function button
until the green light is on.
Power off：
long time press function button
until the red light changes from quick flashing
to always on.
