FEISHEN FAAT6000 Скачать руководство пользователя страница 59

Страница: 59 / 116

weight of the loads must be reduced to maintain stable operating conditions.

LOADS MUST BE CARRIED AS LOW ON THE RACKS AS POSSIBLE

。

Carrying loads high on the racks raises the center of gravity of the vehicle and creates

a less stable operating condition. When cargo loads are carried high on the racks, the

weight of the loads must be reduced to maintain stable operating conditions.

OPERATE ONLY WITH STABLE AND SAFELY ARRANGED LOADS. Avoid

handling off-centered loads which cannot be centered. Always attach the tow load to

the hitch point designated for your ATV.

EXTREME CAUTION MUST BE USED. Avoid operating with loads extending

over the rack sides. Stability and maneuverability may be adversely affected, causing

the vehicle to overturn.

DO NOT BLOCK THE HEADLIGHT/TAILLIGHT AND THE REFLECTORS

when carrying loads on the racks.

DO NOT TRAVEL FASTER THAN THE RECOMMENDED SPEEDS. Vehicle

should never exceed 10 mph (16 km/h) while towing a load on a level grass surface.

Vehicle speed should never exceed 5 mph (8 km/h) when towing loads in rough

terrain, while cornering, or while ascending or descending a hill.

12. RIDING

WARNING

You must inspect your ATV each time before riding to ensure it is in proper working

order. If proper inspection is not done, severe injury or death could result.

See “4. DAILY PRE-RIDE INSPECTION”

1. Sit upright with both feet on footrests and both hands on the handlebars.

2. After starting the engine and allowing it to warm up, shift the transmission into

gear.

3. Check your surroundings and determine your path of travel.

4. Release the parking brake.

Содержание FAAT6000





















































































































Результаты поиска

Содержание FAAT6000

Отзывы:

FEISHEN FAAT6000, Руководство пользователя, Страница: 59 / 116

Результаты поиска

Содержание FAAT6000

Отзывы: