Fein WSG10-115T, Инструкция по эксплуатации, Страница: 20 / 85

20
en
Setting the speed (Figure 10)
WSG14-70ET.
The speed can be set to different levels.
To increase the speed:
➤ Briefly press button.
Reducing the speed:
➤
Keep button pressed down.
The speed set is shown by the symbols on the
speed display.
The last speed setting used is stored in the
power tool after stopping the motor or after
pulling out the mains plug from the mains
socket.
➤
The speed can be preset when the
mains plug is inserted, also when the
motor is at a standstill.
Operation (Figure 11).
➤
Continuously press one of the 4
switchpads. The angle grinder is kept at
working speed.
Notes:
The switchpads actuate easily in order
to prevent tense working postures. Changing
the working posture is possible at any time by
changing the switching position. The angle
grinder can be brought up to the working
speed again within 1.5 seconds by pressing
one of the 4 switchpads.
The
self-start lock
prevents the angle grinder
from automatically restarting again, even after
a brief interruption of the power supply, e.g.,
from a pulled mains plug.
2500/min
3000/min
5000/min
5900/min 7000/min
3500/min 4200/min
2500/min
3000/min
3500/min
5000/min
5900/min 7000/min
4200/min
Fig. 10
Speed regulation
button
Speed display
Fig. 11
3 41 01 121 21 0.book Seite 20 Montag, 22. August 2011 1:11 13