WSG 7-100; WSG 7-115; WSG 7-115 (A); WSG 7-115 PT; WSG 7-125
7. Fitting
C-SC_CSSM
Version 1.0
2019-07-05
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
26
of
45
Fitting the bevel gear (plate) (Applies to: WSG 7-100)
1. Press in the
grooved ball bearing (1).
2.
Insert the plate (2) in the correct position.
3.
Screw in the screws (3) [1.6
+0.2
Nm].
Replace the screws (3) during fitting.
4.
Press in the shaft (4) and the gear
-
wheel [z=39] (5).
5.
Press in the disc (6).
Tools:
- Arbor press
-
Torque
screwdriver
- PH2 bit
- 2x sleeves
16 mm inner diameter
30 mm outer diameter
1
3
4
6
2
5
