Grinding
34130529060
Printed in Germany
Assembly
C-SC_CSSM
Version 1.0
10.03.2021
Page
45
of
73
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
9.1.2 Assembling the armature
Tools:
-
Arbor press
-
Sleeve, 10 mm inner diameter
-
Sleeve, 13 mm inner diameter
1.
Press on the deep groove ball bearing (
1
).
I
NFORMATION
Ensure that the deep groove ball bearing (
1
) is in the correct
position. The plain side (no lettering) must face the collector.
2.
Position the plate (
2
).
3.
Apply oil to the felt ring (
3
).
4.
Position the felt ring (
3
).
5.
Position the washer (
4
).
6.
Press on the grooved ball bearing (
5
).
7.
Press on the pinion (
6
).
I
NFORMATION
Ensure that the plate (
2
) is in the correct position.
I
NFORMATION
Ensure that the washer (
4
) is in the correct position with the
toothing towards the felt ring (
3
).
I
NFORMATION
Ensure that the deep groove ball bearing (
5
) is in the correct
position. The side with brown cover towards the washer (
4
).
I
NFORMATION
Pre-heat the pinion. Ensure that it is in the correct position.
8.
Position the bushing (
7
).
I
NFORMATION
Apply oil to the bushing (
7
).
1
7
2
4
6
3
5
