Grinding
34130529060
Printed in Germany
Assembly
C-SC_CSSM
Version 1.0
10.03.2021
Page
52
of
73
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
9.2.5 Positioning the bearing plate
Steps that must be completed:
-
Assembling the motor
-
Positioning the housing components
-
Positioning the armature
-
Fitting the gearbox housing
-
Assembling the bearing plate
Tools:
-
Torx T20
1.
Fill with 70 g of grease (
1
).
2.
Grease the needle bearing (
2
).
3.
Position the bearing plate (
3
).
4.
Position the four washers (
4
).
5.
Screw in the four screws (
5
) [4.1 Nm].
6.
Check the backlash.
7.
Apply Loctite to the ring (
6
).
8.
Repeat steps 3 to 5.
I
NFORMATION
Use new washers (
4
).
I
NFORMATION
Adjust with shims (
6
), if needed, and repeat steps 3 to 5.
3
5
6
4
2
1
