Metal core drilling
Fitting
C-SC_CSSM
Version 1.0
11.02.2019
Page
87
of
88
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
9.6
Setting the guide
7.
Striking the guide hard (1), hammer the play out of the
guide strip.
I
NFORMATION
Note the procedure:
-
Tap on the side opposite the set screws.
-
Position the plastic hammer at the height of the set
screws.
-
If the guide does not run smoothly, turn the set screws
anticlockwise in increments of 10°.
-
If the guide moves too readily, turn the set screws
clockwise in increments of 10°.
-
Repeat the process after undoing or tightening the set
screws.
Photo shows similar
product